Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Ultra thin screwdriver
watch supply companies sell sets of jewler's screwdrivers for this purpose-
start there - get the best you can - they are reasonably inexpensive - my set has a dozen sizes, each with replaceable blades "Christopher Tidy" wrote in message ... Hi folks, I am looking for a flat screwdriver with an exceptionally thin blade, for use on clock mechanisms. The blade needs to be at least 3/16" long, but no more than 25/1000" thick. Does anyone know of a source for such a screwdriver? UK sources are preferred, if anyone knows of them. I know I can try grinding my own, but I'm not convinced I can do it neatly. Follow-ups set to rec.crafts.metalworking. Many thanks, Chris Tidy ** Posted from http://www.teranews.com ** |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Ultra thin screwdriver
"William Noble" wrote in message ... watch supply companies sell sets of jewler's screwdrivers for this purpose- start there - get the best you can - they are reasonably inexpensive - my set has about a dozen sizes, each with replaceable blades following up - BERGEON is the brand I have http://www.julesborel.com/bergeon.htm there is probably a UK link too, but this will get you started - these will serve you well, though they aren't cheap ** Posted from http://www.teranews.com ** |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking | |||
Ultra thin screwdriver | Metalworking |