Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Source of compresed air
I find the need for a small jet of compressed air to blow out chips etc from
time to time. I am thus looking for a source of compressed air to which some sort of air gun can be attached. It has to satisfy three requirements: 1) It has to be cheap, 2) It has to take up little or no space, 3) It has to be cheap, I heard some people simply use a spare car tire. I asked at Summit tools (who carry all kinds of air stuff) if it is feasible to attach a hose and an air gun to a tire, they did not think so. I really do not want/need a full-sized compressor. A compresed air bottle seems a bit of an overkill. Any suggestions? -- Michael Koblic, Campbell River, BC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SEC IRF 650 A source | Electronics Repair | |||
Source for 12-20 tap and die | Metalworking | |||
Source for 3/8 x 26 tap? | Metalworking | |||
IPE Source in ABQ. NM?? | Woodworking |