Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for brass numbers like these?
Lee Valley Tools say they are discontinuing these brass numbers:
00K80.00 (and .01, .02, etcetera) Pic at this link: http://www.leevalley.com/wood/page.a...at=1,250,43232 I use about 40 of these, mixed, once per year. Does anyone recognize them from another source? Lee Valley droid says they are made in Tiawan and he suspects that numbers sold were low so they are not carrying them anymore. Similar size would do; must be brass, not plated. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for brass numbers like these?
"_" wrote in message ... Lee Valley Tools say they are discontinuing these brass numbers: 00K80.00 (and .01, .02, etcetera) Pic at this link: http://www.leevalley.com/wood/page.a...at=1,250,43232 I use about 40 of these, mixed, once per year. Does anyone recognize them from another source? Lee Valley droid says they are made in Tiawan and he suspects that numbers sold were low so they are not carrying them anymore. Similar size would do; must be brass, not plated. McMaster-Carr has some 1-1/2" tall ones on page 1878 www.mcmaser.com Paul |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for brass numbers like these?
Build yourself a CNC plasma cutter. If you're spending $112 a year for
these, it would pay for itself in about 10 years G. And you can make any size & font you want. This is RCM, what kind of answer did you expect, Bob |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Source for PVD Brass wood screws, 3-inch ??? | Home Repair | |||
See Tommy boy it's all in the NUMBERS not the Name! | Woodworking | |||
need a source for good brass clock faces | Woodworking | |||
JVC VCR Part Numbers | Electronics Repair | |||
brass musical note source? | Metalworking |