Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
HF band saw
On May 7, 10:39*am, Jim Chandler wrote:
stryped wrote: We had a local store open up and they have the metal cutting band saw for 150 bucks or so. I bought one of these cheap bandsaws at TSC several years ago and went through two of them before I finally returned them and bought a chop saw. The problem was the blade cutting 3 inch square tubing crooked. Should I try it again or not? I've had one of these saws for several years now and for $150 it's a good bargain. *In the vertical position you can cut sheet, something that a chop saw can't do. Jim I never thought of that. how thick? I am wanting to make some triangle gussets out of 3/16. Could I use it for that? |
Thread Tools | Search this Thread |
Display Modes | |
|
|