On May 12, 7:03*pm, (Doug White) wrote:
Keywords:
In article , "Wild_Bill" wrote:





I don't see the original post to respond to, but I'll add this 4x6 bandsaw
link to the discussion for anyone that's interested in purchasing one of
these very versatile little saws.

http://www.kwagmire.com/shop/saw/4x6saw.html

Some adjustments and modifications are almost mandatory to improve the
performance of these saws to the point where they will cut fairly straight
every time, regardless of the stock thickness or shape.

I don't encounter wildly crooked cuts because the saw was disassembled and
set true as it was reassembled (replacing inferior hardware and making some
adjustments during reassembly).

In the horizontal cutting mode, a 4" downward cut varies less than one blade
kerf from the scribed line for the cut.
So, cutting 2" square tubing results in fairly close to perfect (TLAR) cuts
and fit-ups for welding.

I bought the Jet version with a USA motor. *Lots of folks ahve reported
that the import motors are shot lived.

I ditched the flimsy sheet metal stand, and built a frame with casters so
I can wheel it under a bench for storage. *The frame I made & the frame
of the saw aren't sufficiently rigid to guarantee a perfectly straight
cut, depending on how uneven the floor is & where I park it, but it
still works pretty well.

First thing you want to do with any of these is to open up the gear box
and clean out the teaspoon of casting sand they leave in, presumably so
you have to buy a new one sooner.

One thing that helped mine enormously was to install a Fenner link belt. *
It ran LOT smoother. *Just be careful with the length & make sure the
cover clears the pulley & belt at all three speed settings. *I set mine
up at one end of the range & melted the cover when I changed speeds where
it was just touching the belt.

Doug White- Hide quoted text -

- Show quoted text -

I guess I lucked out with mine, gear box was clean as a whistle, the
old lube was as stinky as the new 90 gear oil I stuck in there, worm
and gear looked good after a bunch of chrome-moly tubing went through
it. I stuck a magnetron magnet on the cover to suck up any particles
of gear that might float around and also act as a wrench holder for
adjusting the "vise". The link belt is a good idea, I just got one
from the hardware store, think it was a Goodyear. No lumps, anyway.

Stan