Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal- Colchester lube
I have a new to me lathe, a 70's Colchester-Clausing VS13. The manual
specifies Shell Tellus 37 oil for the headstock reservoir and Shell Tonna T68 for the apron. I think i can put Vactra 2 into the apron and be compatible, but what works for the headstock? And further it came with no center for the spindle. It has D1-4 camlock. What is the internal taper, Morse 5 ? Manual does not specify. thanks T.Alan |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
help with colchester master mk 2 | Metalworking | |||
Colchester 1500: Whatsit? | Metalworking | |||
Colchester Student Mk 1 - some questions | Metalworking | |||
Colchester gear: $800!!!!!! | Metalworking | |||
Colchester carriage stop? | Metalworking |