On Fri, 15 Feb 2008 16:46:44 -0600, "Pete C."
wrote:

Ignoramus10962 wrote:

http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html

any idea what is this?

i

It's a simple draw tube and collet adapter for a lathe. The taper on the
outside of the collet holder would fit the lathes spindle taper,
whatever that may be.


Ayup. Short headstock too. Might have been a grinding fixture or
speed lathe. Im voting grinding fixture of some sort due to the short
length.

Gunner



"Pax Americana is a philosophy. Hardly an empire.
Making sure other people play nice and dont kill each other (and us)
off in job lots is hardly empire building, particularly when you give
them self determination under "play nice" rules.

Think of it as having your older brother knock the **** out of you
for torturing the cat." Gunner

http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html

any idea what is this?

i

Ignoramus10962 wrote:

http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html

any idea what is this?

i

It's a simple draw tube and collet adapter for a lathe. The taper on the
outside of the collet holder would fit the lathes spindle taper,
whatever that may be.

That's what I was thinking but it's pretty short for most of the lathes
I'm familiar with. I might be a special drawbar for an endmill sharpener
or similar. Looks like about a 1" shaft with a 1-3/8" hole for the start
of the taper.

I wonder what the diameter

Pete C. wrote:
Ignoramus10962 wrote:
http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html

any idea what is this?

i

It's a simple draw tube and collet adapter for a lathe. The taper on the
outside of the collet holder would fit the lathes spindle taper,
whatever that may be.

On 2008-02-12, Gunner Asch wrote:
On Fri, 15 Feb 2008 16:46:44 -0600, "Pete C."
wrote:

Ignoramus10962 wrote:

http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html

any idea what is this?

i

It's a simple draw tube and collet adapter for a lathe. The taper on the
outside of the collet holder would fit the lathes spindle taper,
whatever that may be.


Ayup. Short headstock too. Might have been a grinding fixture or
speed lathe. Im voting grinding fixture of some sort due to the short
length.

Thanks gents. I think that I understand now.

i

http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html


Is this prep for a sale? i would like some end mills like in your photo
0000019 0002405

aOn 2008-02-17, Stupendous Man wrote:
http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html


Is this prep for a sale? i would like some end mills like in your photo
0000019 0002405

I am sorry, what photos? Do you have a URL

i

Is this prep for a sale? i would like some end mills like in your photo
0000019 0002405

I am sorry, what photos?

Go to your linked photo,
http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html
and click "next" 6 times. Wrench lots 1 and 4 look useful too.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

On 2008-02-17, Stupendous Man wrote:
Is this prep for a sale? i would like some end mills like in your photo
0000019 0002405

I am sorry, what photos?

Go to your linked photo,
http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html
and click "next" 6 times. Wrench lots 1 and 4 look useful too.

I will list that stuff, and the wrenches, soon. If you want to make me
a fair offer on all of the wrenches and the indexable end mills,
shipping will be 8.95. Wrenches are all brand name, Williams,
Armstrong and Billings.

i

RoyJ wrote:
That's what I was thinking but it's pretty short for most of the lathes
I'm familiar with. I might be a special drawbar for an endmill sharpener
or similar. Looks like about a 1" shaft with a 1-3/8" hole for the start
of the taper.
Right, no guarantee it is for a lathe, could be for a horizontal
mill. If it is a B&S taper, that would make the latter more likely.

Jon

On 2008-02-17, Stupendous Man wrote:
Is this prep for a sale? i would like some end mills like in your photo
0000019 0002405

I am sorry, what photos?

Go to your linked photo,
http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html
and click "next" 6 times. Wrench lots 1 and 4 look useful too.

Much more useful instructions.

The numbers you showed are two hit counters. I've never figured
out why he runs two hit counters on each image. Perhaps one to see how
many times an image has been viewed, and the other how many different IP
addresses have visited the site -- or some other random guess.

Enjoy,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

On 2008-02-18, DoN. Nichols wrote:
On 2008-02-17, Stupendous Man wrote:
Is this prep for a sale? i would like some end mills like in your photo
0000019 0002405

I am sorry, what photos?

Go to your linked photo,
http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html
and click "next" 6 times. Wrench lots 1 and 4 look useful too.

Much more useful instructions.

The numbers you showed are two hit counters. I've never figured
out why he runs two hit counters on each image. Perhaps one to see how
many times an image has been viewed, and the other how many different IP
addresses have visited the site -- or some other random guess.

Not much sense on a sale prep page, but one counter counts the
individual page, and the other all pages in a group. My script does
it./

i

On 2008-02-18, Ignoramus11444 wrote:
On 2008-02-18, DoN. Nichols wrote:

[ ... ]

The numbers {the original poster] showed are two hit counters. I've never figured
out why he runs two hit counters on each image. Perhaps one to see how
many times an image has been viewed, and the other how many different IP
addresses have visited the site -- or some other random guess.

Not much sense on a sale prep page, but one counter counts the
individual page, and the other all pages in a group. My script does
it./

The problem is that it only shows as a counter until the value
is filled in. If you identified them as such, or use one of the usual
hit counter image formats (like the Veeder-Root counter format) it might
be more obvious to people that it is not a static identifier of the
image -- and they might even pick up the URL from the browser's
navigation bar instead. :-)

Enjoy,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

I will list that stuff, and the wrenches, soon. If you want to make me
a fair offer on all of the wrenches and the indexable end mills,
shipping will be 8.95. Wrenches are all brand name, Williams,
Armstrong and Billings.

Cool. Email me at my disposable then I will reply from my main email.
"arborigine at yahoo dot com".

--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

email sent
On 2008-02-19, Stupendous Man wrote:

I will list that stuff, and the wrenches, soon. If you want to make me
a fair offer on all of the wrenches and the indexable end mills,
shipping will be 8.95. Wrenches are all brand name, Williams,
Armstrong and Billings.

Cool. Email me at my disposable then I will reply from my main email.
"arborigine at yahoo dot com".

On Feb 15, 4:20 pm, Ignoramus10962 ignoramus10...@NOSPAM.
10962.invalid wrote:
http://igor.chudov.com/misc/ebay/tmp/tmp-1582.jpg.html

any idea what is this?

i

The spindle holding the 4c collet is just like two of my 6 dividing
heads. I made a new one to hold 5c collets and stored the old one in a
drawer. That's why this guy has one laying around too. jb