 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Sandvik RCKT 13 04 00-PH 4030 inserts
I need 10 of these.
Sandvik RCKT 13 04 00-PH 4030 inserts. The usual supplier wants a fortune. Anyone have a modest cost source? Little ½" round ones. For a face milling cutter. Bob AZ |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Sandvik RCKT 13 04 00-PH 4030 inserts
"Bob AZ" wrote in message ... I need 10 of these. Sandvik RCKT 13 04 00-PH 4030 inserts. The usual supplier wants a fortune. Anyone have a modest cost source? Little ½" round ones. For a face milling cutter. Bob AZ How thick are they? How many do you want? |
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Sandvik RCKT 13 04 00-PH 4030 inserts
How thick are they? �How many do you want? Tom 1/8" thick. 10 each would be fine. they are �" in diameter. I also need the screws to attach them. Take care Bob AZ |
|
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Sandvik RCKT 13 04 00-PH 4030 inserts
"Bob AZ" wrote in message ... How thick are they? ?How many do you want? Tom 1/8" thick. 10 each would be fine. they are ?" in diameter. I also need the screws to attach them. Take care Bob AZ Well, nevermind. The ones I have are custom made for me at 3/16" thick and have a hole that is .135" and .165". I use the hole to cut wire and the OD is still pristine, it's the hole gets worn and chipped. Sorry they won't work unless you EDM a screw hole in them...probably not worth it. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inserts. | Home Repair | |||
| Where to buy Sandvik Lathe Tools and Inserts | Metalworking | |||
| Carbide Inserts | Metalworking | |||
| Are there blank inserts WITH HOLES for the modular inserts? | Home Repair | |||
| FA: 4" Sandvik Face Mill and Large Lyndex Tapper | Metalworking | |||
Linear Mode
