 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Toolpost rocking with cheap two bolt mount
I was making a cut-off last night with my Aloris AXA-77. After
reducing speed from 750rpm to 150rpm, and resetting the height of the blade, things worked MUCH better, But as it got close to cut-off, it grabbed a bit and the whole toolpost, compound slide, and clamp ring ROCKED towards the workpiece... Now there's something you don't see every day... Still have to get a 4x6 bandsaw and a Set-Tru chuck. Most likely about the start of February. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Armstrong QC Toolpost discontinued in 1997 | Metalworking | |||
| Query: Any Experience With This ToolPost Grinder? | Metalworking | |||
| toolpost grinders | Metalworking | |||
| Shelf: Dowel/bolt Mount... | Home Repair | |||
| FA - Aloris AXA toolpost set in exc. condition | Metalworking | |||
Threaded Mode
