Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,632
Default OT Digital camera (Oly C-2500L?)

nick hull fired this volley in
:
1 sec of trigger.

Any help or suggestions greatly appreciated. I would rather do this
with a camera rather than a video link if possible - I don't need real
time but do need a compact easy to review output; I'd normally review
the output every week or 2.


Nick, I had "neighbor visitors" for a long time, who thought my barn was
an attractive meeting place. Things got messed with, and occasionally
taken. (especially the beer; damn!)

I set up an inexpensive Wally-World video camera, and a junked-out old
desktop PC. I run the freeware "HSSVSS", which monitors up to two
channels of video (up to 8 in the purchased version), and saves still
frames upon motion detection.

It has been _perfect_ for me. It will monitor as long as I want, and
save up all motion frames for future review, with an option to re-cycle
the frames after a certain amount of storage has been used. It will also
e-mail me whenever there's an event, and allow me to review the frames or
watch the real-time video remotely (as from my business, 10 miles away).

The whole rig (discounting the old PC, which cost, essentially, nothing)
came in at $119, including software, cabling, camera, and video-to-USB
interface.

After a quick advertising around the community concerning the fact that I
had 24-hour surveillance, and we've not had another visit, except for the
errant deer who wanders into the shot now and again.

LLoyd

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Digital Camera Jonni Electronics Repair 2 March 15th 06 12:00 AM
Digital camera repair Virginia Electronics Repair 5 March 8th 05 07:42 AM
Use for digital camera haven't seen documented [email protected] Home Repair 17 December 28th 04 12:37 AM
digital camera repairs? Sam Kaan Electronics Repair 3 August 31st 03 04:00 PM


All times are GMT +1. The time now is 08:06 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"