Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #30   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,632
Default OT Digital camera (Oly C-2500L?)

nick hull fired this volley in
:
1 sec of trigger.

Any help or suggestions greatly appreciated. I would rather do this
with a camera rather than a video link if possible - I don't need real
time but do need a compact easy to review output; I'd normally review
the output every week or 2.


Nick, I had "neighbor visitors" for a long time, who thought my barn was
an attractive meeting place. Things got messed with, and occasionally
taken. (especially the beer; damn!)

I set up an inexpensive Wally-World video camera, and a junked-out old
desktop PC. I run the freeware "HSSVSS", which monitors up to two
channels of video (up to 8 in the purchased version), and saves still
frames upon motion detection.

It has been _perfect_ for me. It will monitor as long as I want, and
save up all motion frames for future review, with an option to re-cycle
the frames after a certain amount of storage has been used. It will also
e-mail me whenever there's an event, and allow me to review the frames or
watch the real-time video remotely (as from my business, 10 miles away).

The whole rig (discounting the old PC, which cost, essentially, nothing)
came in at $119, including software, cabling, camera, and video-to-USB
interface.

After a quick advertising around the community concerning the fact that I
had 24-hour surveillance, and we've not had another visit, except for the
errant deer who wanders into the shot now and again.

LLoyd



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Digital Camera Jonni Electronics Repair 2 March 15th 06 12:00 AM
Digital camera repair Virginia Electronics Repair 5 March 8th 05 07:42 AM
Use for digital camera haven't seen documented [email protected] Home Repair 17 December 28th 04 12:37 AM
digital camera repairs? Sam Kaan Electronics Repair 3 August 31st 03 04:00 PM


All times are GMT +1. The time now is 03:21 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"