Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
H8178 Table Power Feed for G0463/G0619 (Sieg X3 / Super X3)
http://www.grizzly.com/products/Tabl...63-G0619/H8178
I found mine to work OK, except that the way it's mounted. There is no way to line up the motor shaft to the leadscrew in a way that keeps things lined up. The manual handwheel is harder to turn due to the side pressure exerted by the motor shaft... Mounting it like a bridgeport power feed on the right side would mean that the shaft is not going to bind on it. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Work and holder weight limits for Grizzly G0463 mill (Sieg X3 SmallMill) | Metalworking | |||
Sieg X3 impressions [Grizzlu G0463] | Metalworking | |||
Power feed for Sieg X3 {Grizzly G0463] | Metalworking | |||
Bridgeport table feed | Metalworking | |||
B`port power table feed ???? | Metalworking |