Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Tool bit for V-Belt Pulley
A Few Questions:
I recently made a V-belt pulley but with some difficulty because I had trouble setting up a 20 degree angle on the inside surface closest the lathe head. I suppose I could turn the pulley around but then it might not run true. Anyway, seems like I should be able buy an off-the-shelf tool bit with a snubbed 40 degree included angle. Just plunge a certain depth and I'm done. Is there such an animal? Second, I could go for a smaller belt but can't seem to find anything smaller than 2L. Where should I look? And if I can't go smaller, how come? Brad Smallridge AiVision |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Flat Belt step pulley | Metalworking | |||
Belt replacement on step pulley j-head | Metalworking | |||
Re Tool Belt Bloviation | Woodworking | |||
Tool Belt Bloviation | Woodworking | |||
Bandsaw query: adjusting pulley alignment AND belt tension? | Woodworking |