Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Chicago Pneumatic Impact Gun CP734 Parts
I've got one of these older model impact guns that is just not
performing as well as it should. I took a look around for the tune up kit and the repair kit, but couldn't find anything specific for this gun. I found a bunch of references to CP734H parts and to CPT734, but nothing for plain CP734. I don't think the "H" parts will fit. Does anybody have a source for parts for the older CP734 model? Also, is there part that typicall goes bad on these guns? Thanks. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Chicago Pneumatic Impact Gun CP734 Parts
On Mon, 01 Oct 2007 10:25:36 -0700, jim wrote:
I've got one of these older model impact guns that is just not performing as well as it should. I took a look around for the tune up kit and the repair kit, but couldn't find anything specific for this gun. I found a bunch of references to CP734H parts and to CPT734, but nothing for plain CP734. I don't think the "H" parts will fit. Does anybody have a source for parts for the older CP734 model? Also, is there part that typicall goes bad on these guns? Thanks. Bearings, vanes and trigger springs are the usual culprits. Parts here about half way down the page. http://www.parts4tools.com/generic13.html --Andy Asberry-- ------Texas----- |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Chicago Pneumatic Impact Gun CP734 Parts
On Mon, 01 Oct 2007 16:53:46 -0500, with neither quill nor qualm, Andy
Asberry quickly quoth: On Mon, 01 Oct 2007 10:25:36 -0700, jim wrote: I've got one of these older model impact guns that is just not performing as well as it should. I took a look around for the tune up kit and the repair kit, but couldn't find anything specific for this gun. I found a bunch of references to CP734H parts and to CPT734, but nothing for plain CP734. I don't think the "H" parts will fit. Does anybody have a source for parts for the older CP734 model? Also, is there part that typicall goes bad on these guns? Thanks. Bearings, vanes and trigger springs are the usual culprits. Parts here about half way down the page. http://www.parts4tools.com/generic13.html If the tool has been sitting for very long, the oil gums up and the power goes way down. A disassembled soak in solvent, reoiling, and reassembly usually helps a whole lot. My old Rodac 1/2" impact is doing that since I haven't used it in decades. -- Men never do evil so completely and cheerfully as when they do it from religious conviction. - Blaise Pascal |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Chicago AWS/FabTech Chicago show | Metalworking | |||
Pneumatic nailer, etc. | Home Repair | |||
Pneumatic Drill | UK diy | |||
Pneumatic Finish Nailer or pneumatic stapler | Home Repair |