Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Question from a newbie
Greetings. I have a question for this group. I operate a small auto accessory store. One of my products, made from 6061 aluminum was being designed by a local company. Basically they were drilling (maybe) a hole just shy of 1 inch wide all the way through a 2 X 2 X 2 piece of aluminum. I'm wondering how someone would go about accomplishing this? A drill press with a 1 inch bit, a mill with a reamer? I'm lost. They shop is not wanting to continue and I have to pick up where they left off. I do own a mini-mill just for extra info. Please adivse if I need to include more info. TIA Mike |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Removing a radiator for decorating, newbie question.. :) | UK diy | |||
Newbie Lathe Chuck Question | Metalworking | |||
newbie question - drilling big holes in steel plate | Metalworking | |||
Newbie Question; Cold Rolled Steel bar | Metalworking |