Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
When I saw Gunner posted off topic political BS earlier today I decided this
newsgroup doesn't have a clue about what it's for. I considered Gunner one of the RCM mainstays with an occasional foray into politics but today's post was all his trying to stir the politics pot. Folks there are thousands of groups to argue your politics with other people. Why do you insist on polluting this group?? Please go to the other groups and leave this for metalworking. If you don't understand the concept of a group without politics, just on topic posts, how about leaving and let the rest of us enjoy our hobby. -- Clif |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
Amen,,,,Amen
Roger Paskell "Clif Holland" wrote in message news:c9c7g.2221$k%2.1734@trnddc03... When I saw Gunner posted off topic political BS earlier today I decided this newsgroup doesn't have a clue about what it's for. I considered Gunner one of the RCM mainstays with an occasional foray into politics but today's post was all his trying to stir the politics pot. Folks there are thousands of groups to argue your politics with other people. Why do you insist on polluting this group?? Please go to the other groups and leave this for metalworking. If you don't understand the concept of a group without politics, just on topic posts, how about leaving and let the rest of us enjoy our hobby. -- Clif |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On Sun, 07 May 2006 01:35:04 GMT, "Clif Holland"
wrote: When I saw Gunner posted off topic political BS earlier today I decided this newsgroup doesn't have a clue about what it's for. I considered Gunner one of the RCM mainstays with an occasional foray into politics but today's post was all his trying to stir the politics pot. Folks there are thousands of groups to argue your politics with other people. Why do you insist on polluting this group?? Please go to the other groups and leave this for metalworking. If you don't understand the concept of a group without politics, just on topic posts, how about leaving and let the rest of us enjoy our hobby. Well Cliff..its like this. I had this tremendous urge to parody the Left who has been calling for the Crucifixion of Limbuagh. Its fascinating to watch the silence from those very hypocrites who have been chortling about the Limbuagh situation for several years now. As I stated in another discussion..the sudden deafening silence from the Left is much akin to that the moment when you hit the kill switch on that D9 Cat you have been running all day. There were the expected couple apologists for Kennedy..but they were from the normal Leftwing Useful Idiots, whose hypocrisy is already well known, so they were to be expected. Now, on the other hand..it would appear that you are posting off topic on a subject that has nothing do do with metalworking, and is pretty much bitching..no different than any other off topic post in the long run. Of course I was trying to stir the political pot. Duh! Its been quite some time since I started an OT post, though I do respond to them on occasion. It was in me to do it..and I did it. No appolgies, no excuses and if the urge strikes me again in the future..Ill fire it up again. Deal with it. Now you have a couple options..you can kill file me, the same way Ive got the Other Cliff killfiled, or you can simply not read the obviously titled subject line on the post...or you can simply shrug..and hit Delete or Ignore Thread. Most news readers have em. I use em all the time when subjects come up that I have no interest in. Steam stuff bore me to tears, so I generally Ignore Thread. Shrug..right click, select and voila..its done. Simple..no? I suggest you learn how to do it..as it will save your tender sensibilities some angst. You wouldnt be a Democrat or a Lib would you? As for New Lows..your new here eh? Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. "I think this is because of your belief in biological Marxism. As a genetic communist you feel that noticing behavioural patterns relating to race would cause a conflict with your belief in biological Marxism." Big Pete, famous Usenet Racist |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
etc etc Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. Mmm, good score Gunner. What sort of timber? Andrew VK3BFA. PS - I ignored the political stuff, it was just tooooo far out to respond to. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On 6 May 2006 23:35:40 -0700, "Andrew VK3BFA"
wrote: etc etc Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. Mmm, good score Gunner. What sort of timber? About 2/3s of it is used. A friend tore down a house, paid a bunch of day laborers to pull the nails as he was gonna use it to build some outbuildings..the city started giving him grief over it and he said **** it. A **** load of it is new..stuff he was gonna use. Including at least (30) 20' ones..but I cant figure how to get em from So. Cal to home..so unfortunately Im gonna have to wack em into 12 + 8 footers Andrew VK3BFA. PS - I ignored the political stuff, it was just tooooo far out to respond to. G Gunner "I think this is because of your belief in biological Marxism. As a genetic communist you feel that noticing behavioural patterns relating to race would cause a conflict with your belief in biological Marxism." Big Pete, famous Usenet Racist |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
Gunner wrote: On 6 May 2006 23:35:40 -0700, "Andrew VK3BFA" wrote: etc etc Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. Mmm, good score Gunner. What sort of timber? About 2/3s of it is used. A friend tore down a house, paid a bunch of day laborers to pull the nails as he was gonna use it to build some outbuildings..the city started giving him grief over it and he said **** it. A **** load of it is new..stuff he was gonna use. Including at least (30) 20' ones..but I cant figure how to get em from So. Cal to home..so unfortunately Im gonna have to wack em into 12 + 8 footers Andrew VK3BFA. PS - I ignored the political stuff, it was just tooooo far out to respond to. G Gunner Yes, ****es you right off when you have to cut things to get them home I sold my van about 2 years ago, it had roof racks and could do things like that. (Now have a "sensible" station wagon - dead boring...useless for big messy things in the back) You DO realise you now have the formwork for your concreting the floorways project - start getting it set up, score some reo if you can, and put the word out at the local pre-mix cement places - most of em are greatful to have a place to dump the remains of jobs that customers over-ordered - saves them, ( and the customers,) dump fees..... Andrew VK3BFA. Andrew VK3BFA. |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On 7 May 2006 05:10:46 -0700, "Andrew VK3BFA"
wrote: Gunner wrote: On 6 May 2006 23:35:40 -0700, "Andrew VK3BFA" wrote: etc etc Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. Mmm, good score Gunner. What sort of timber? About 2/3s of it is used. A friend tore down a house, paid a bunch of day laborers to pull the nails as he was gonna use it to build some outbuildings..the city started giving him grief over it and he said **** it. A **** load of it is new..stuff he was gonna use. Including at least (30) 20' ones..but I cant figure how to get em from So. Cal to home..so unfortunately Im gonna have to wack em into 12 + 8 footers Andrew VK3BFA. PS - I ignored the political stuff, it was just tooooo far out to respond to. G Gunner Yes, ****es you right off when you have to cut things to get them home I sold my van about 2 years ago, it had roof racks and could do things like that. (Now have a "sensible" station wagon - dead boring...useless for big messy things in the back) You DO realise you now have the formwork for your concreting the floorways project - start getting it set up, score some reo if you can, and put the word out at the local pre-mix cement places - most of em are greatful to have a place to dump the remains of jobs that customers over-ordered - saves them, ( and the customers,) dump fees..... Andrew VK3BFA. Andrew VK3BFA. Ayup. Big problem with the ready mix place..Im on the road during the week when they have "overages" and that stuff doesnt store well G Not to mention Id have to pump a lot of it to get it into where the floorways are. The drivers want to dump and scoot, not hang around while I wheelbarrow a couple yards. Shrug Gunner "I think this is because of your belief in biological Marxism. As a genetic communist you feel that noticing behavioural patterns relating to race would cause a conflict with your belief in biological Marxism." Big Pete, famous Usenet Racist |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
"Gunner" wrote in message ... On 6 May 2006 23:35:40 -0700, "Andrew VK3BFA" wrote: etc etc Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. Put aside the price you paid for the lumber. If you wanted to build say an, office within a building, would you do it in wood or steel studs and dry wall? You probably see where I'm going with this... As far as the Kennedy kid goes, I have hope for him...it appears he hasn't murdered anybody yet. |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On Sun, 07 May 2006 13:27:38 GMT, with neither quill nor qualm, "Tom
Gardner" quickly quoth: gunner's post about tubafores... Put aside the price you paid for the lumber. If you wanted to build say an, office within a building, would you do it in wood or steel studs and dry wall? You probably see where I'm going with this... Wood. I still don't like (or trust) how the flimsy steel studs work. Wood also adds mass to reduce noise transmittal through walls. As far as the Kennedy kid goes, I have hope for him...it appears he hasn't murdered anybody yet. giggle The operative word here is "yet", right, since he's known to have the DWK/FWK gene? I'm a recovering alcoholic. None of the Kennedys are. They're all still practicing -heavily- AFAIK.Perhaps the kid didn't take the breathalyzer because he hadn't been drinking, but drugging heavily and didn't want the continued testing to reveal what all he'd been doing. The rest of us would have landed in jail until we came to court and were sentenced. Refusal to submit to testing is at least a misdemeaner in all states, I believe. I hope the suits who told the cops to release him all get canned, the jucking ferks. -- The ancient and curious thing called religion, as it shows itself in the modern world, is often so overladen with excrescences and irrelevancies that its fundamental nature tends to be obscured. --H.L. Mencken in "Treatise on the Gods" |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On Sun, 07 May 2006 13:27:38 GMT, "Tom Gardner"
wrote: "Gunner" wrote in message .. . On 6 May 2006 23:35:40 -0700, "Andrew VK3BFA" wrote: etc etc Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. Put aside the price you paid for the lumber. If you wanted to build say an, office within a building, would you do it in wood or steel studs and dry wall? You probably see where I'm going with this... Steel studs. They are cheaper here in California IRRC. No..I dont have a clue where you are going...pant pant..its already 90F here..and I just got in from unloading the trailer.. As far as the Kennedy kid goes, I have hope for him...it appears he hasn't murdered anybody yet. There but for the Grace of God..... Gunner "I think this is because of your belief in biological Marxism. As a genetic communist you feel that noticing behavioural patterns relating to race would cause a conflict with your belief in biological Marxism." Big Pete, famous Usenet Racist |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
Are you planning to nail up the 2x4's for racking for your metal
scrap? Gunner wrote: Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On Tue, 09 May 2006 10:31:16 -0500, Mike Berger
wrote: Are you planning to nail up the 2x4's for racking for your metal scrap? Gunner wrote: Gunner, who just finished welding up racking for the 200+ 8' & 12' 2x4s he scrounged. No. I welded up some racking to hold the 2x4s, that Im going to use to bulld a storage shed and other things out of. I generally use metal racks and bins to hold the metal scrap Im somewhat space limited these days, and am trying to get things cleaned up, cleaned out and so forth. What I really need is a crew of about 4 guys, a case of ice cold beer or sodas and a day or two to tear everything down, move the buried van, and put all the pallet racks into their proper positions. The carpentry work I can do myself, but I find the old ticker gets a bit bothersome after several hours of hard physical labor. Shrug Gunner The aim of untold millions is to be free to do exactly as they choose and for someone else to pay when things go wrong. In the past few decades, a peculiar and distinctive psychology has emerged in England. Gone are the civility, sturdy independence, and admirable stoicism that carried the English through the war years .. It has been replaced by a constant whine of excuses, complaints, and special pleading. The collapse of the British character has been as swift and complete as the collapse of British power. Theodore Dalrymple, |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On Sun, 07 May 2006 01:35:04 GMT, "Clif Holland"
wrote: When I saw Gunner posted off topic political BS earlier today I decided this newsgroup doesn't have a clue about what it's for. I considered Gunner one of the RCM mainstays with an occasional foray into politics Much the same way that Jabba the Hut has an occasional foray into eating. Please go to the other groups and leave this for metalworking. His oft-repeated excuse is that it's everyone else's job to work around his mental illness. It's the same "screw you all" attitude that got him where he is today... too dysfunctional to progress in the normal world, yet not a spectacular enough train wreck to interest Jerry Springer. Wayne |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
Wayne sez:
" His oft-repeated excuse is that it's everyone else's job to work around his mental illness. It's the same "screw you all" attitude that got him where he is today... too dysfunctional to progress in the normal world, yet not a spectacular enough train wreck to interest Jerry Springer." Bite your tongue, varlet! Gunner could very well host the Springer show and put ol' Jerry out of work. Bob Swinney "wmbjk" wrote in message ... On Sun, 07 May 2006 01:35:04 GMT, "Clif Holland" wrote: When I saw Gunner posted off topic political BS earlier today I decided this newsgroup doesn't have a clue about what it's for. I considered Gunner one of the RCM mainstays with an occasional foray into politics Much the same way that Jabba the Hut has an occasional foray into eating. Please go to the other groups and leave this for metalworking. Wayne |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
Bite your tongue, varlet! Gunner could very well host the Springer show and put ol' Jerry out of work. Bob Swinney Gunner! Gunner! Gunner! |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
On Mon, 08 May 2006 00:41:20 GMT, "Tom Gardner"
wrote: Bite your tongue, varlet! Gunner could very well host the Springer show and put ol' Jerry out of work. Bob Swinney Gunner! Gunner! Gunner! Next up on the Gunner Show..The Alabama School for Wayward Girls Naked Rifle Team. Do you know where your daughter is? Now a word from our sponsers...... "I think this is because of your belief in biological Marxism. As a genetic communist you feel that noticing behavioural patterns relating to race would cause a conflict with your belief in biological Marxism." Big Pete, famous Usenet Racist |
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
New Low
"Clif Holland" wrote in message news:c9c7g.2221$k%2.1734@trnddc03... When I saw Gunner posted off topic political BS earlier today I decided this newsgroup doesn't have a clue about what it's for. I considered Gunner one of the RCM mainstays with an occasional foray into politics but today's post was all his trying to stir the politics pot. Folks there are thousands of groups to argue your politics with other people. Why do you insist on polluting this group?? Please go to the other groups and leave this for metalworking. If you don't understand the concept of a group without politics, just on topic posts, how about leaving and let the rest of us enjoy our hobby. -- Clif Having broken my cardinal rule to not read your posts, at least routinely, I sure got a chuckle from this one. I commend you for having stayed "on topic" through the years! g Nope! You're not plonked like a small handful of rude people. I think you're harmless, but also clueless when it comes to machining. Harold |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|