 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Reishauer chuck - anyone used one?
I have just bought a lathe with a Reishauer RH250 chuck on it. It is
a 10 inch 3 jaw chuck. It has one pinion to drive the jaws; this is tangential to the spindle axis, not radial as on a normal 3 jaw. There is a pin that seems to be a ratchet to release the jaws, and they can be mounted at differing distances from the centre of the chuck, so you could mount an offset piece rather like a 4 jaw independent chuck. The jaws are reversable. Any background or help on using the chuck would be appreciated. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| My lathe's spindle is too long for my new chuck | Woodturning | |||
| Teknatool Titan Chuck draft review | Woodturning | |||
| Runout on 3 Jaw Chuck | Metalworking | |||
| ENCO no-name chuck or Bison? | Metalworking | |||
| Cuemaking-Metal Lathe Chuck Question? | Metalworking | |||
Linear Mode
