Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
What adhesive is the best for Delring?
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
"Alex" wrote in message oups.com... What adhesive is the best for Delring? A strong PSA is the only thing that'll stick it, and it's not permanent. Only heat welding - which ain't easy on Delrin - will permanently affix two pieces. Short of that, consider conventional fasteners. LLoyd |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
On 6 Apr 2006 11:13:56 -0700, Alex wrote:
What adhesive is the best for Delring? Depends on required strength and load orientation (shear, peel, etc¡K) Spray Loctite 770 (primer), let it dry. Other products are called ¡§Surface energy activators¡¨. If you have access to a plasma etcher, that is the way to go! Then use the adhesive of choice (cyanoacrylates and epoxys are best). -- Skuke Reverse the domain name to send email |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
Keywords:
In article .com, "Alex" wrote: What adhesive is the best for Delring? There's something called "Cyanopoxy" that claims to work. It includes a "primer" that presumably breaks up the chains near the surface so the glue has something to hang on to. A web search should turn up a source. Doug White |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
Sprinkle iron powder on one piece, put them together and tape them tightly
and put them in the microwave for a bit. k.o. "Alex" wrote in message oups.com... What adhesive is the best for Delring? |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
knowone wrote:
Sprinkle iron powder on one piece, put them together and tape them tightly and put them in the microwave for a bit. Is this a gag or would this really work? Why? GWE |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
Grant Erwin writes: knowone wrote: Sprinkle iron powder on one piece, put them together and tape them tightly and put them in the microwave for a bit. Is this a gag or would this really work? Why? One method of welding plastic is to embed a piece of wire in the joint and then heat the wire from the outside with an induction coil (not that I've ever done this, but I've read about it). I don't know if a microwave would work or not. |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
There's something called "Cyanopoxy" that claims to work. It includes a "primer" that presumably breaks up the chains near the surface so the glue has something to hang on to. A web search should turn up a source. Doug White www.coolchem.com It is pretty amazing Stuff..... HTH Jeff |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
Never_Enough_Tools wrote:
www.coolchem.com It is pretty amazing Stuff..... Can't be amazing enough to have to register just to look. Bob |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
Bob Engelhardt wrote:
Never_Enough_Tools wrote: www.coolchem.com It is pretty amazing Stuff..... Can't be amazing enough to have to register just to look. Bob I couldn't even get that far. Watched the download flicker for a couple of minutes and it was still only half way to the end. If a company can't build a home page that loads in a minute over a dialup FORGET it. ...lew... |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
On Fri, 07 Apr 2006 10:55:27 -0400, Bob Engelhardt
wrote: Never_Enough_Tools wrote: www.coolchem.com It is pretty amazing Stuff..... Can't be amazing enough to have to register just to look. Bob And you have to be really "cool" to get discounts. -- Randy Replogle |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
What glue for delrin?
Alex wrote: What adhesive is the best for Delring? This is a situation often addressed by makers of billiard cues, ie glueing delrin to wood. A special glue is required - one vendor is "Atlas Billiard Supply" at www.cuestik.com. Martin |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lamello Dosicol glue applicator | Woodworking | |||
To use hide glue? | Woodworking | |||
ARTICLE: The Truth About Polyurethane Glue | Woodworking | |||
Glue Up - High Anxiety | Woodworking | |||
What glue is best to use for segmented turning? | Woodturning |