What glue for delrin?
 

What adhesive is the best for Delring?

What glue for delrin?
 

"Alex" wrote in message
oups.com...
What adhesive is the best for Delring?

A strong PSA is the only thing that'll stick it, and it's not permanent.
Only heat welding - which ain't easy on Delrin - will permanently affix two
pieces. Short of that, consider conventional fasteners.

LLoyd

What glue for delrin?
 

On 6 Apr 2006 11:13:56 -0700, Alex wrote:

What adhesive is the best for Delring?


Depends on required strength and load orientation (shear, peel, etc¡K)
Spray Loctite 770 (primer), let it dry. Other products are called ¡§Surface
energy activators¡¨. If you have access to a plasma etcher, that is the way
to go!

Then use the adhesive of choice (cyanoacrylates and epoxys are best).

--
Skuke
Reverse the domain name to send email

What glue for delrin?
 

Keywords:
In article .com, "Alex" wrote:
What adhesive is the best for Delring?

There's something called "Cyanopoxy" that claims to work. It includes a
"primer" that presumably breaks up the chains near the surface so the
glue has something to hang on to. A web search should turn up a source.

Doug White

What glue for delrin?
 

Sprinkle iron powder on one piece, put them together and tape them tightly
and put them in the microwave for a bit.

k.o.


"Alex" wrote in message
oups.com...
What adhesive is the best for Delring?

What glue for delrin?
 

knowone wrote:

Sprinkle iron powder on one piece, put them together and tape them tightly
and put them in the microwave for a bit.

Is this a gag or would this really work? Why?

GWE

What glue for delrin?
 

Grant Erwin writes:

knowone wrote:

Sprinkle iron powder on one piece, put them together and tape them tightly
and put them in the microwave for a bit.

Is this a gag or would this really work? Why?

One method of welding plastic is to embed a piece of wire in the joint and
then heat the wire from the outside with an induction coil (not that I've
ever done this, but I've read about it). I don't know if a microwave would
work or not.

What glue for delrin?
 

There's something called "Cyanopoxy" that claims to work. It includes a
"primer" that presumably breaks up the chains near the surface so the
glue has something to hang on to. A web search should turn up a source.

Doug White

www.coolchem.com

It is pretty amazing Stuff.....

HTH

Jeff

What glue for delrin?
 

Never_Enough_Tools wrote:

www.coolchem.com

It is pretty amazing Stuff.....

Can't be amazing enough to have to register just to look. Bob

What glue for delrin?
 

Bob Engelhardt wrote:

Never_Enough_Tools wrote:

www.coolchem.com

It is pretty amazing Stuff.....


Can't be amazing enough to have to register just to look. Bob
I couldn't even get that far. Watched the download flicker for
a couple of minutes and it was still only half way to the end.
If a company can't build a home page that loads in a minute over
a dialup FORGET it.
...lew...

What glue for delrin?
 

On Fri, 07 Apr 2006 10:55:27 -0400, Bob Engelhardt
wrote:

Never_Enough_Tools wrote:

www.coolchem.com

It is pretty amazing Stuff.....

Can't be amazing enough to have to register just to look. Bob

And you have to be really "cool" to get discounts.
--
Randy Replogle

What glue for delrin?
 

Alex wrote:
What adhesive is the best for Delring?

This is a situation often addressed by makers of billiard cues, ie
glueing delrin to wood. A special glue is required - one vendor is
"Atlas Billiard Supply" at www.cuestik.com.

Martin