 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#9
Posted to rec.crafts.metalworking,sci.electronics.design
|
|||
|
|||
Safely testing 22 kV capacitors
In article ,
Ignoramus27088 wrote: Ian, would you or anyone have any idea if what I have is HV resistors? They are blue, about 3 inches long, and are marked VICTOREEN MOX-3 12 MEG. You need to get a collection of EEM catalogs. Back in the 1993 edition, the Victoreen pages in the Resistor section says that it's most likely a MAXI-MOX rated at 22.5 kV. Rated at 4.5 watts if it's a MOX-3-13, epoxy coated or 7.5 watts for a MOX-3-12 silicone coated. Mark Zenier Googleproofaddress(account:mzenier provider:eskimo domain:com) |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Safely testing 22 kV capacitors | Metalworking | |||
| Safely testing 22 kV capacitors | Metalworking | |||
| Testing OSCON capacitors on Motherboard... | Electronics Repair | |||
| Bad capacitors -- how fast do they rot after testing out OK? | Electronics Repair | |||
| Problems using ESR Meter testing Motherboard Electrolytic Capacitors | Electronics Repair | |||
Threaded Mode
