Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for metric Kep nuts?
Hi all -
We're looking for a reliable source of slightly oddball metric hardware in relatively small quantities (1,000 pieces or so). Particularly, we need Kep nuts (hex nut with attached external star lockwasher) in 2.5M, 3.0M, 4.0M and 5.0M sizes. Also, 4M carriage head bolts in 1/2" (12mm) length. Anybody got a lead on a source? Thanks in advance - Carla reply address is spam-trapped - replies to the newsgroup would be appreciated |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for metric Kep nuts?
In article ,
Carla Fong wrote: Hi all - We're looking for a reliable source of slightly oddball metric hardware in relatively small quantities (1,000 pieces or so). Particularly, we need Kep nuts (hex nut with attached external star lockwasher) in 2.5M, 3.0M, 4.0M and 5.0M sizes. Is that the one piece units or the ones with a washer that rotates? I buy the one piece ones at a local surplus store but I'm sure they would give discounts for 1000 pcs. -- Free men own guns, slaves don't www.geocities.com/CapitolHill/5357/ |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for metric Kep nuts?
Carla Fong wrote: Hi all - We're looking for a reliable source of slightly oddball metric hardware in relatively small quantities (1,000 pieces or so). Particularly, we need Kep nuts (hex nut with attached external star lockwasher) in 2.5M, 3.0M, 4.0M and 5.0M sizes. Also, 4M carriage head bolts in 1/2" (12mm) length. Anybody got a lead on a source? McMaster-Carr lists Keps nuts in M3, M4, and M5, but at outrageous prices: approx $100 for quantity 1000. That's several times more than non-metric kep nuts of similar size. I suspect talking to a metric fastener distributor would be productive. Tim. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Question regarding FET with low Drain to Source capacitance - FET_termination.jpg (0/1) | Electronics | |||
Correct to -- Question regarding FET with low Drain to Source capacitance - FET_termination.jpg (0/1) | Electronics | |||
source for parallel machine files - progress | Metalworking | |||
Source for photo-couple/opto-couple | Electronics Repair |