Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
One Shot Oilier Oil Poll
I'm putting a one-shot oilier on my mill and after researching thru a
mountain of material from all over, (literally it's taken me weeks to read all through all this stuff) I've decided to use "Tru-Edge ISO VG 68 Semi-Synthetic (Light-Med Wt.) Way Oil" myself. (No I have no association that company.) However before I commit, I'd like to hear from anyone who thinks this might be bad idea. Secondly I'd like to take a poll. If you've only read this forum and never replied, here's a good time to do so - if you would reply with the brand name and product oil you are using in your "One shot" oilier. I'll compile the results (in say a week) and place it in a table and re-post it for all us see. Should be interesting. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
One Shot Oilier Oil Poll
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
One Shot Oilier Oil Poll
According to :
I'm putting a one-shot oilier on my mill and after researching thru a mountain of material from all over, (literally it's taken me weeks to read all through all this stuff) I've decided to use "Tru-Edge ISO VG 68 Semi-Synthetic (Light-Med Wt.) Way Oil" myself. (No I have no association that company.) However before I commit, I'd like to hear from anyone who thinks this might be bad idea. Secondly I'd like to take a poll. If you've only read this forum and never replied, here's a good time to do so So -- do you actually mean to *exclude* the usual posters? Just in case you did not mean that, I'll say that I use Vactra No 2 in mine -- but the choice was made several years ago. - if you would reply with the brand name and product oil you are using in your "One shot" oilier. I'll compile the results (in say a week) and place it in a table and re-post it for all us see. Should be interesting. Enjoy, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
One Shot Oilier Oil Poll
|
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
One Shot Oilier Oil Poll
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
CHENEY SHOT IN ANGER !? | Woodworking | |||
OT - Global Warming (Was "Lying Liberals.") | Metalworking | |||
Replacement One Shot Tubing | Metalworking | |||
OT Environmentalists may be in deep Kimchee | Metalworking |