Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Tractor vs. Bobcat
I'm buying a new (to me) home out in the country on ~4.5 acres land. There is no garage/pole building/workshop on the property and the land isn't very flat. Also, there are a lot of trees & brush growth to be cleared. At first I was thinking about buying an older Bobcat or similar and selling it after I was done with it. Lately I've been wondering if a tractor with a front end loader would do the same job as good as, or better than, a Bobcat. I thought the tractor would be more useful for mowing, etc. I guess either one could handle a future "CADDigger" backhoe attatchment project. Any thoughts as to why a Bobcat would be better than a tractor or vice-versa. Thanks! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bobcat or other gasoline powered welder? | Metalworking |