Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
need steel or AL shafts about 1" long, 1/2" diameter, with about a 3/8" hole bored in center
I need a quantity of steel or aluminum shafts about 1" long, 1/2" diameter,
with about a 3/8" hole bored about 1/2" deep into the center of the shaft. Need small tapped hole perpendicular to the length for a set screw. I will be using it to adapt a motor shaft to a wheel. Is this a commonly available part ? If so, what name does it go by ? I have tried doing this myself using drill press and aluminum rod, but my skills are still in the development stage. I wondered if maybe there is something already available I can use instead. Thanks ! JCD |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stainless Steel Project Help(part 2) | Metalworking | |||
Brown's gas?? | Metalworking | |||
how to drill a 12cm diameter hole in steel? | UK diy | |||
Jacobs Chuck on Jet Mini Lathe | Woodturning |