Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Magnetic Chuck Repair Question
I have just obtained a 6 X 18 magnetic chuck. I think the brand is Walker,
but I can't tell for sure because the nameplate is missing. The On - Off lever works hard and I was wondering if I should attempt to disassemble the chuck to see if I could fix it. Is this something that can be easily done? John |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Chuck question | Metalworking | |||
magnetic chuck problem | Metalworking | |||
Cuemaking-Metal Lathe Chuck Question? | Metalworking | |||
Magnetic chuck weirdness | Metalworking |