Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
HF 230v Spot Welder info
Anyway, this welder has never been particularly powerful. It will spot
weld up to about 18GA; any thicker, and you should pack food and water for the wait...WTF, it's HF after all. Right? Wrong. It started loosing serious amps, and sparked/smoked from under the lever. The switch stuck on also. I disassembled it enough to remove the switch. No big deal. The switch is repairable. Fixed, I thought. Well, the switch was. Still low current and sparking under the handle. Round 2. Found very high resistance in the braided strap connections supplying current to the moveable jaw. Cleaned both sides of the connection, wire wheeled the tong ends and brushed the sockets they mount in. Now it rocks! Welds in 18GA take less than half the time they did when it was new. Hit the switch, and it's right there. I drilled out the tongs and tapped 3/8-24 for Miller tips. The OE tips suck. The Miller package contained a squeeze tube of some white goo. Oh, something to improve the power flow through the threads, I thought. Wrong. It's some sort of anaerobic thread locker. Assholes! The new Miller tip screwed in 3/4 way and stopped. Dead. It would not unscrew. I even heated the tong red hot; just snapped the tip off the threaded end. I drilled it out to a thin threaded barrel and collapsed it with a small punch. Didn't touch the threads. Damn I'm good This is a good little spot welder for light stuff if you clean up the current path and throw some good tips on. Just watch the duty cycle. JR Dweller in the cellar -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth If you're not the lead dog, the view never changes Doubt yourself, and the real world will eat you alive The world doesn't revolve around you, it revolves around me No skeletons in the closet; just decomposing corpses -------------------------------------------------------------- Dependence is Vulnerability: -------------------------------------------------------------- "Open the Pod Bay Doors please, Hal" "I'm sorry, Dave, I'm afraid I can't do that.." |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: The Complete Metalsmith Illustrated Handbook SC 1991 | Metalworking | |||
Miller 35 wirefeed welder info request | Metalworking | |||
Spot Welder homebrew? Soldering gun? | Metalworking | |||
Question on Miller Spot welder tips | Metalworking | |||
Jointech routerbits? | Woodworking |