Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
Steve B
 
Posts: n/a
Default Walmart


"Ignoramus12063" wrote in message
...
I used to feel, and with some reasons, that Walmart was an honest
company providing us the benefits of its efficiency and purchasing
power.

I no longer think so and do not regard walmart as a trustworthy
company, based on my personal experiences with the following.

1. "Smart battery chargers" are worse than stupid battery chargers,
turning off at various times based on wrong (in my opinion) charging
algorithm.

2. Their soldering iron does not solder anything.

3. Their battery jumper cable was complete trash and basically fell
apart and was very bad. (I need a decent jumper cable by the way,
something made for real users).

I had a few other experiences with their stuff made just to barely
survive light use. Perhaps it is OK for people who use things very
lightly, but they do not work well for me. I am not in any way a
"tough user", just trying to do things as they were intended to be
done, like solder wires or jump car batteries. I have resolved to buy
better stuff and pay more than walmart prices if necessary.

Had to get this off my chest.

i


Whenever I need a part for a car, I go to NAPA or CarQuest, or someplace
like that. Checker, Autozone, etc, are good for fluids, and a few other
items, but when I want something that will last, and I know is made better
than their Chinese crap, I go to a different supplier.

It is the same with Walmart stuff.

STeve


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Walmart John Normile Metalworking 84 February 22nd 06 06:59 AM
Walmart Tom Gardner Metalworking 16 January 21st 06 03:55 AM
Walmart Jim Insolo Metalworking 3 January 19th 06 07:52 PM
walmart power tools opinions Eli Sucks Home Repair 12 December 31st 04 07:41 AM


All times are GMT +1. The time now is 06:58 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"