Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
Dick
 
Posts: n/a
Default air compresser control

Anyone here have any good luck getting good, new on/off controls for a
portable air compressor? I've got a Black Max 5 hp compressor that has been
very dependable since 1994. About 2 1/2 years ago the on/off control went
bad. The electrical contacts finally burned up. I got a new one from
http://www.mastertoolrepair.com/ . It looked identical, kicks in at 80 psi
and off at 125psi. All seems good except these things don't last. In the
last 2.5 years I've replaced this unit 3 times and now it is bad again and
hasn't been on for six months. The points burn up and start sticking
together so that the compressor never shuts off and I'm afraid there's going
to be a fire as the motor gets pretty hot after a few hours of running.
Are there any better units out there?
Dick

--
Richard H. Neighbors
Building and repairing fine billiard cues for real pool players at
affordable prices.
Over 35 years exp. Located in Cincinnati OH
ph.# 513 233-7499
e-mail
web site
http://www.dickiecues.com


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Maytag digital oven control problem ms Home Repair 4 December 22nd 05 01:26 AM
Broken remote control for Encon ceiling fan Haymish UK diy 0 December 10th 05 06:48 PM
Viesmann MC remote control pascal pirotte Electronics Repair 1 September 30th 04 02:08 PM
OT What is happening to the gun control movement? Gunner Metalworking 21 May 27th 04 02:14 AM
TV Remote Control rubber pad(UR50CT1071) used in remote control for Panasonic TV Model TX-29GF10X Steve Electronics Repair 4 November 1st 03 02:27 PM


All times are GMT +1. The time now is 08:13 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"