Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Making 4-11/16 Holes in Al Panel
I need to make some holes in an aluminum instrument panel. The panel is 1/8
inch thick |
#2
|
|||
|
|||
Making 4-11/16 Holes in Al Panel
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Query re fitting hearth panel and back | UK diy | |||
How to straighten bowed T&G bath panel | UK diy | |||
Fridge freezer - how to remove top front panel (Bosch KGV3120GB/04 UK model) | UK diy | |||
Jig for perpendicular holes in a rod | Metalworking |