Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
OT -- Looking for a Plastics Parts Manufacturer
An upcoming project I have requires a plastic (generic description)
radome. I'm not familiar with any companies that do this so I thought I'd turn to the source that pretty much knows everything! The total number will be 6400 units during the spring and summer of 2006. Pictured as an upside down flower pot, they will be 18 inches diameter at the bottom, 12 diameter at the top and 16 tall. There will also be a flat, circular base required for the radome to attach to. I would appreciate any leads to companies that could guide me as to the best material to use and to quote this job for me. I'd prefer a company in North or South Carolina. If you want to reply directly, use this email address 2z5prwr02 (at) sneakemail.com Thanks, Ed |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Where do prof. repairers get parts? | Electronics Repair | |||
Hi, successes and stuck on rust on iron parts. | Metalworking | |||
yamaha dv-c6660 help ID parts | Electronics Repair | |||
Parts for Atlas 12" 7122 Lathe | Woodworking | |||
Looking for a distributor for old SHARP parts | Electronics Repair |