Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Grinding a magnetic chuck?
I have finally rebuilt my ancient Robot surface grinder, and would like
to look at truing the magnetic chuck. I remember reading somewhere that someone stated that the chuck must be in the "on" or "hold" position during the regrinding. I would have thought this might have caused problems in that the metal grinds would be held onto the chuck surface rather than being able to be blown free. Can anyone give any advice? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
My lathe's spindle is too long for my new chuck | Woodturning | |||
R*volume*raduis2 c3po "Theroy of everything" | Electronics Repair | |||
Magnetic Chuck Repair Question | Metalworking | |||
Teknatool Titan Chuck draft review | Woodturning | |||
magnetic chuck problem | Metalworking |