Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Anyone has Shop Fox 17" Drill Press?
My local shop has Shop Fox 17" Floor Drill Press model W1680 for $270
which seems o be a good deal. Here is the specs: 1 HP 1720 RPM, 12 speed Motor, 110/220 Volt, 3-1/4" spindle travel, 5/8" Drill Chuck, 750 RPM - 3050 RPM, 17" swing, 14" Diameter Table If anyone has this drill press please share your experience. Thanks, Alex |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mortiser vs. Drill Press | Woodworking | |||
Menards "Tool Shop" Drill Press? | Woodworking | |||
Slow down a drill press: 2nd motor and use the existing motor as a countershaft? | Metalworking | |||
Drill press sanding drums | Woodworking | |||
Advice on a drill press, & misc questions | Metalworking |