Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Went to an auction today, didn't get anything, Wanted a pallet jack and then
a complete Foundry kit. The foundry kit was a Green chest with everything needed to pound sand and pour aluminum. I just wasn't really up to spending any money so couldn't get my heart into it and wound up watching a pallet jack go for 20 dollars and this foundry set for 35. Here are some photos that mostly show the sky due to the california wild fires occuring. I was amazed at the site. The pictures don't do it justice. So far 6000 acres are on fire and 17 homes have been lost. My best wishes for those people. http://www.advprodtek.com/images/ANOTHER_DAY.HTM |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Is is safe to remove glass from gas fire. | UK diy | |||
Suitable caps/cowls for disused chimney and living flame gas fire | UK diy | |||
Gas fire flue extract... | UK diy | |||
Advice on living flame gas fire | UK diy | |||
gas fire leak test | UK diy |