Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Crimping large cable lugs without a crimper
Two options:
1. Bring it over to my shop ( Surrey BC Canada ) and I'll crimp it for you...... any size from # 8 to 750 Kcm.....3500Kcm if I have to drag out the big 60 ton Alcan press. 2. Find a electrical utility truck working and ask them to crimp it for you. I'll bet they take care of it without a fuss and fill your pockets with black tape. pete "Ignoramus25589" wrote in message ... I will soon need to crimp many terminals on many short, but thick, 1 gauge or 0 gauge cables. Crimpers are just too expensive. Is there some way to get acceptable crimps without a crimper. I guess, also, that I could buy one on ebay and later sell it, but I would prefer to avoid that. i |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Crimping large cable lugs without a crimper | Metalworking | |||
Crimping large cable lugs without a crimper | Metalworking | |||
Crimping large cable lugs without a crimper | Metalworking | |||
Speedfit technique | UK diy | |||
A challenge for old house lovers | UK diy |