 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Crimping large cable lugs without a crimper
"Ignoramus25589" wrote in message ... I will soon need to crimp many terminals on many short, but thick, 1 gauge or 0 gauge cables. Crimpers are just too expensive. Is there some way to get acceptable crimps without a crimper. I guess, also, that I could buy one on ebay and later sell it, but I would prefer to avoid that. i Solder |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| A challenge for old house lovers | UK diy | |||
| Correction factors in running cable | UK diy | |||
| Car aerial cable | UK diy | |||
| Routeing Electrical FTE cable | UK diy | |||
| Grounding Rod Info | Home Repair | |||
Threaded Mode
