Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Static Phase Converter?
Hi Guys,
Once again I am here with my hat in hand humbly requesting your assistance. As some of you know, I am in the process of purchasing a Colchester Circa 1960's MK 1 1/2 lathe. It has a two speed 5hp 3 phase motor. Will I be able to run it successfully on a static phase converter? Thanks in advance for the help. Regards. Joe... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
My $45 homemade 10 HP phase converter is WORKING!!! | Home Repair | |||
Motor capacitor sizing? | Metalworking | |||
Advice wanted on static self starting phase converter for a 2HP motor. | Metalworking | |||
static phase converter question | Metalworking | |||
static phase converter question | Metalworking |