Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
layout question - bolt hole pattern
I need some guidance on figuring out what the bolt hole co-ordinates
are to build a drive flange. The hub I need to bolt to has three holes, evenly spaced with a center to center dimension of 3.607. How do I calculate what the bolt hole x-y co-ordinates are to drill this when held in the mill vice? thanks in advance, ron |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Removing a Frozen Bolt with Heat | Home Repair | |||
Hydraulic Punch hole size question | Metalworking | |||
How straight are drilled holes? Was Need to drill 1" deep .138 hole Thank you! | Metalworking | |||
Deep hole drill profile question | Metalworking | |||
OT-Michael Moore digs himself a deeper hole | Metalworking |