Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Restored vacuum pump
Hi all,
Just thought I'd post a couple of pictures of the vacuum pump I was talking about last month. It's a little Edwards ED 35 two stage pump which I found in a local laboratory's skip (dumpster) last year and have spent a bit of time restoring. I had the motor rewound, repainted it, stripped and cleaned the pump and fitted new springs and seals, and mounted it on some anti-vibration feet. Now it works very sweetly and holds its vacuum for more that a week after I switch it off. I'm planning to use it for some experiments on electrical discharges in low pressure gases. I'm meaning to create a web page with some pictures of the restoration, but so far I haven't got round to it, so I thought I'd share a couple of pictures. Pump as found: http://www.mythic-beasts.com/~cdt22/vp_as_found.jpg Pump restored: http://www.mythic-beasts.com/~cdt22/vp_restored.jpg Enjoy, Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Several things wrong with new flat - no central heating, low hot water pressure even with water pump, noisey pump | UK diy | |||
Air Conditioning Vacuum pumps? Long... | Woodturning | |||
Almost done with my home-made vacuum press. Anyone else done one? | Woodworking | |||
Gast 0522 Vacuum Pump | Woodworking | |||
How to make a vacuum kiln in 20 screwups or less. | Woodworking |