Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Scott S. Logan
 
Posts: n/a
Default Men, Metal & Machines - NEW Model Engineering Expo (Updated 23 Aug 2003)

In case anyone has not heard, there *WILL* be a Model Engineering Show
in California this fall.

The Schoenly's, organizers of Cabin Fever have started *TWO* new Model
Engineering Expositions.

The first was Iron Fever, held in early August in York, Pennsylvania.

The next is Men, Metal & Machines, to be held in Visalia, California
on October 25 and 26, 2003.

Visalia Convention Center
303 E. Acequia Ave
Visalia, CA
Web: http://www.cabinfeverexpo.com

Map: http://tinyurl.com/k4lv

Hours: Sat. 9am to 5pm
Sun. 9am to 4pm

Cost: $7.00, good for both days.

I have confirmed that Rudy Kouhoupt will be presenting a seminar at
the show.

************************************************** ***************
* For you Modelers, please remember: You are welcome, and *
* ENCOURAGED to exhibit your models at the show. No *
* pre-registration or additional cost (other than admission) is *
* required. *
************************************************** ***************

Vendors (such as us) *DO* need to pre-register, and there are
additional fees. For more information on securing a vendor table,
contact Gary Schoenly at (800) 789-5068.

The "host" hotel will be the Radisson Hotel Visalia, which is adjacent
to the Convention Center. Telephone (559) 636-1111. They have a
special rate for attendees of $79/night. Be sure to mention you are
coming for the Men, Metal & Machines Model Engineering Show.

I hope to see lots of you folks there!


--
+--------------------------------------------+
| Scott Logan - ssl "at" lathe.com |
| Logan Actuator Co. http://www.lathe.com |
| Harvard, IL |
|++++++++++++++++++++++++++++++++++++++++++++|
| Parts and Accessories for Logan Lathes and |
| Montgomery Wards Lathes |
| Logan-Lilly Mine Hoist Safety Controllers |
+--------------------------------------------+
"Measure Twice, Cut Once"

RCM FAQ - http://w3.uwyo.edu/~metal
Metal Web News - http://www.metalwebnews.com/
Help squash SPAM: http://www.cauce.org/

--
+--------------------------------------------+
| Scott Logan - ssl "at" lathe.com |
| Logan Actuator Co. http://www.lathe.com |
| Harvard, IL |
|++++++++++++++++++++++++++++++++++++++++++++|
| Parts and Accessories for Logan Lathes and |
| Montgomery Wards Lathes |
| Logan-Lilly Mine Hoist Safety Controllers |
+--------------------------------------------+
"Measure Twice, Cut Once"

RCM FAQ - http://w3.uwyo.edu/~metal
Metal Web News - http://www.metalwebnews.com/
Help squash SPAM: http://www.cauce.org/
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Men, Metal & Machines - NEW Model Engineering Expo (Updated 23 Aug 2003) Scott S. Logan Metalworking 0 September 23rd 03 03:30 PM
Men, Metal & Machines - NEW Model Engineering Expo (Updated 23 Aug 2003) Scott S. Logan Metalworking 0 September 13th 03 05:47 PM
Men, Metal & Machines - NEW Model Engineering Expo Gunner Metalworking 1 August 19th 03 01:36 PM
Iron Fever - NEW Model Engineering Expo (Updated 3 Aug 2003) Scott S. Logan Metalworking 0 August 3rd 03 04:18 PM
Iron Fever - NEW Model Engineering Expo Scott S. Logan Metalworking 0 July 14th 03 02:33 PM


All times are GMT +1. The time now is 07:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"