Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#18
![]() |
|||
|
|||
![]()
There is a little known phenomena called electrolyte stratification where a
cold concrete floor can increase the self discharge rate of a lead acid battery. The bottom layer of electrolyte gets cooled by conduction from the floor while the upper layer stays basically at room temp. Since there is no natural circulation to mix the layers, the situation is static and the increased leakage current flow will eventually discharge the battery. Diesel-electric submarines had bubbler tubes in their batteries to agitate the electrolyte . The problem was potentially serious because the batteries were exposed to very wide temp. ranges in submarine duty. See http://www.uuhome.de/william.darden/...4.htm#concrete Randy "Tom Gardner" wrote in message . .. Mom's car, sitting for 2.5 years had to be moved. The Interstate 72 mo. battery that was put in just before storage won't take a charge...no surprise, I put another new one in. Rather than turning in the core for $12 I will get it replaced under warranty. Is there any way to keep a new battery on the shelf for extended periods of time? Should I keep it on a trickle charger? Is it an urban myth that sitting on concrete will kill it? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Sony Clie TJ27 - battery problem | Electronics Repair | |||
Is it safe for kids to take apart electronics? | Electronics Repair | |||
Battery life tests | Home Repair | |||
Battery Problem QX4 Solved | Home Repair | |||
Deep Cycle Lead-acid Battery Tips | Electronics Repair |