Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Senior Moment
On Sat, 03 Sep 2005 20:59:44 -0400, Pete Keillor
wrote: I was finishing up the OA cart today, and couldn't get an arc. I was using my Dynasty 200DX in stick mode with 6011 rod. Checked out the setup several times. I finally noticed that I had the stick in backwards. Good grief. Pete Keillor I smoked my commercial 5hp rotary converter tonight trying to start what turned out to be a 10hp motor so I could breadboard up a bigger rotary converter to run my big Airco Phase Arc 350. Damnit Anyone want to trade a MINTY Airco 3ph Mig will do marvelous spray transfer, 350 amp, with new Tweeco torch, beautiful condition, low time, for a good Mig I can use on 220 single phase and run .045 wire with? Anyone have a larger rotary converter? Gunner "Pax Americana is a philosophy. Hardly an empire. Making sure other people play nice and dont kill each other (and us) off in job lots is hardly empire building, particularly when you give them self determination under "play nice" rules. Think of it as having your older brother knock the **** out of you for torturing the cat." Gunner |