 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
tapping mp35n metal
I want to know if any one has taped this metal mpn35n. It has a heat
treated ultimate tensil of 300kpsi, I am not sure of the rockwell, but I think it is about 52 c . Are their carbide taps. I think this is the heat treated condition and I think it comes at 41 rockwell in it's anealed state. Don Huseman |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Metal Roofing | Home Repair | |||
| Custom metal stamps? | Metalworking | |||
| Does polishing one or both surfaces reduce metal to metal friction? | Metalworking | |||
| Creating very light hollow metal ornaments | Metalworking | |||
| Drywall screws for metal studs prone to strip, please help. | Home Repair | |||
Linear Mode
