Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#2
![]() |
|||
|
|||
![]() "Cliff" wrote in message ... http://www.brainsluice.com/miscellan...onlanding.html Now, where are Shu, John S. & BB? -- Cliff The history channel did a show on the subject and addressed each thing that web page you just linked to bitched about. Take a picture of something with the sun bouncing off it with no atmosphere to filter it at night and you wont see ANYTHING except what the light is hitting, in this case the unfiltered sun. Try it, you wont get any stars on your film. As far as the shade, go outside and look, it doesnt always point directly away from the light source, especially when its reflecting off white sand. Just watch the history channel show. They went to the moon. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Landing Light Switch | UK diy | |||
hardwood floor landing | Home Repair | |||
Hall and landing - light switching confusion... | UK diy | |||
gas boiler on landing: noise? | UK diy |