Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
madhat
 
Posts: n/a
Default 6" PVC PIPE

Find a local Plumber the smallest one you can find that does commercial
work. He might have a couple of pieces of scrap.

Try an ag/irrigation outfit.

Try your local city water/sewer department. they probably trash pieces that
small every day.

BTW, You never said whether you need schedule 40, sched 80, 3034 or what. If
you need to have fittings, joints etc.

Good Luck



--
Some people will tell you that slow is good...and it may be, on some
days...but I am here to tell you that fast is better. I've always believed
this, in spite of the trouble it's caused me. Being shot out of a cannon
will always be better than being squeezed out of a tube. That is why God
made fast motorcycles, Bubba...."

Hunter S. Thompson


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A/C Drainage Pipe clogged... water backing up into hallway Ringo Langly Home Repair 5 August 19th 04 02:50 PM
A/C Drainage Pipe clogged... water backing up into hallway Ringo Langly Home Repair 6 August 17th 04 09:15 PM
minimal pipe diameter Allan Adler Metalworking 9 January 15th 04 01:27 AM
sewer line replacement jeff Home Repair 11 September 2nd 03 02:17 AM
Sewer line replacement jeff Home Ownership 1 August 27th 03 03:24 AM


All times are GMT +1. The time now is 04:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"