Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
John Albers
 
Posts: n/a
Default Looking for Jacobs 59B chuck key

I have a jacobs 59B drill chuck (fits SB 9" lathe spindle) but no key
for it. I have looked in Enco, MSC, and McMaster Carr catalogs for
replacement keys, but I cannot find one for a Jacobs 59B chuck. Is
there a more recently made Jacobs chuck that uses the same key as the
59B? ANy help would be greatly appreciated.

Thank You
  #2   Report Post  
PJ
 
Posts: n/a
Default Looking for Jacobs 59B chuck key


"John Albers" wrote in message
om...
I have a jacobs 59B drill chuck (fits SB 9" lathe spindle) but no key
for it. I have looked in Enco, MSC, and McMaster Carr catalogs for
replacement keys, but I cannot find one for a Jacobs 59B chuck. Is
there a more recently made Jacobs chuck that uses the same key as the
59B? ANy help would be greatly appreciated.

Thank You



MSC has them. It's a K4...Paul

http://www.mscdirect.com/MSCCatLooku...rodID=08592842


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
magnetic chuck problem Kenneth W. Sterling Metalworking 3 August 30th 03 06:37 PM
Cuemaking-Metal Lathe Chuck Question? J. Alan Metalworking 6 August 9th 03 03:07 AM
Drill chuck for >.020 drill bit Ryan Metalworking 11 August 7th 03 08:19 PM
bought a chuck on ebay from marjenmachine Asp3211968 Metalworking 0 August 1st 03 04:11 AM
Jacobs Chuck removal from 1/2in. drill Dale Randall Metalworking 1 July 19th 03 02:00 AM


All times are GMT +1. The time now is 09:02 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"