 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
Need info and size on Bridgeport M-head, J-head spindle and quill Quill
Hello,
I just purchaed a pallet of Bridgeport parts I don't really need. I have many quills, spindles, gears, bearing races, gears, lead and drive screws, etc. Can anyone give me the outer diameter of the M-head and J-head quill? I'm positive that I have several M-head spindles in new condition with MT#2, plus (i think) m-head quills, draw bars, pinion gears, etc. The only parts manual I have is for Bridgeport series I, it lists the M-head quill diameter at 2.562" and the j-head quill diameter at 3.375. I have about 10-15 pieces marked "Bridgeport quill" but these quills only have an outer diameter of about 2.247" Perhaps these aren't Bridgeport parts at all? I'm fairly certain that I have quite a few M-head spindles and draw bars in there though. I need to get rid of this stuff. Any help would be appreciated. Does anyone have any idea what Bridgeport these quills are from if any? Thanks, Eddie |
|
#2
|
|||
|
|||
|
There is a bridgeport yahoo group that has all the manuals online. You
should be able to find the different ones there. I just downloaded the manual for the round ram style. Russ www.professorwiz.com www.metalhobbies.com "Eddie" wrote in message link.net... Hello, I just purchaed a pallet of Bridgeport parts I don't really need. I have many quills, spindles, gears, bearing races, gears, lead and drive screws, etc. Can anyone give me the outer diameter of the M-head and J-head quill? I'm positive that I have several M-head spindles in new condition with MT#2, plus (i think) m-head quills, draw bars, pinion gears, etc. The only parts manual I have is for Bridgeport series I, it lists the M-head quill diameter at 2.562" and the j-head quill diameter at 3.375. I have about 10-15 pieces marked "Bridgeport quill" but these quills only have an outer diameter of about 2.247" Perhaps these aren't Bridgeport parts at all? I'm fairly certain that I have quite a few M-head spindles and draw bars in there though. I need to get rid of this stuff. Any help would be appreciated. Does anyone have any idea what Bridgeport these quills are from if any? Thanks, Eddie |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Cleaning VCR - need help and a diagram | Electronics Repair | |||
| Earthing Conductor size (massive??) & new Consumer Unit | UK diy | |||
| Dynamax Cart info, was antique arcade game repair | Electronics Repair | |||
Hybrid Mode
