Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15   Report Post  
jim rozen
 
Posts: n/a
Default

In article , Harold and Susan Vordos says...

Very gentlemanly of you to offer your apology. Ignoramus12712 is one of
the more polite people on the board and has shown very nice manners and
appreciates all concepts offered.


Indeed. I think the problem is, the issue being discussed
is reasonably complicated so that it requires a first-principles
approach.

This means asking specific questions that make no assumptions
at all. Unfortunately this sometimes makes the question asker seem
totally retarded.

I understand this effect well because I do it a lot at work.

Sometimes the only way to "get to the bottom of it" is to
look like a total retard. :^)

Jim


--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Petrol in Diesel Engine MartinC UK diy 120 September 5th 05 10:41 PM
ChangFa generator set is ALIVE! SomeBody Metalworking 7 June 16th 05 11:33 AM
Replacement engine for Colemate Generator Robert Snyder Metalworking 12 August 23rd 04 03:31 AM
stopping a diesel Engineman1 Metalworking 13 October 2nd 03 10:55 PM
The Most Powerful Diesel Engine in the World! Harold & Susan Vordos Metalworking 55 September 17th 03 05:12 AM


All times are GMT +1. The time now is 12:02 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"