 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#10
|
|||
|
|||
I have a stop on my lathe however I only run up close to it and then
hand feed, as there is no clutch or auto disengage on it. I normally use a mike head in it or can substitute a threaded rod and threaded bushing if its just for a plain stop, without the need for adjustment. The one I made is on my Projects Page on my website. http://www.frugalmachinist.com ============================================== Put some color in your cheeks...garden naked! |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| lathe - metal or wood? | Woodworking | |||
| FS: Sheldon WWII Army lathe and extras | Metalworking | |||
| Kelton Balancer Review Draft--long | Woodturning | |||
| A Video for Beginners (a bit long) | Woodturning | |||
| My $20 lathe (well, sort of...) | Woodworking | |||
Threaded Mode
