Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Narex Model CAT40-32-16OU info help
Narex Model CAT40-32-16OU
On EBay but I can find no info on minimum bore diameter. The seller doesn't have any additional info either. Any help out there? TIA JohnF I'm gonna post to AMC also |
#2
|
|||
|
|||
Narex Model CAT40-32-16OU info help
Cat 40 specs are in Machinery's Handbook. IIRC under machine spindles.
Here it is, the index says "milling machines, spindle nose tapers page1638 (18th edition) Taper is 3.5 inches per foot Small end diameter is .997 to 1.005" Large diameter 1.75" -- Ron Thompson On the Beautiful Mississippi Gulf Coast USA Moderator of http://groups.yahoo.com/group/castinghobby/ http://www.plansandprojects.com "A man who works with his mind, heart, and billfold is an Entrepreneur" Joe Martin, owner of Sherline Products, Inc. "JohnF" wrote in message ... Narex Model CAT40-32-16OU On EBay but I can find no info on minimum bore diameter. The seller doesn't have any additional info either. Any help out there? TIA JohnF I'm gonna post to AMC also |
#3
|
|||
|
|||
Narex Model CAT40-32-16OU info help
The specs on the boring head is what I need, sorry I wasn't very
clear on that. I can find no info on the range of the boring head itself. It's a Microbore style boring head, the seller says it goes up to about 1.570 dia. but I need to find out the minimum bore size it's capable of doing. JohnF On Tue, 15 Jul 2003 11:23:57 -0500, "Ron Thompson" wrote: Cat 40 specs are in Machinery's Handbook. IIRC under machine spindles. Here it is, the index says "milling machines, spindle nose tapers page1638 (18th edition) Taper is 3.5 inches per foot Small end diameter is .997 to 1.005" Large diameter 1.75" -- Ron Thompson On the Beautiful Mississippi Gulf Coast USA Moderator of http://groups.yahoo.com/group/castinghobby/ http://www.plansandprojects.com "A man who works with his mind, heart, and billfold is an Entrepreneur" Joe Martin, owner of Sherline Products, Inc. "JohnF" wrote in message ... Narex Model CAT40-32-16OU On EBay but I can find no info on minimum bore diameter. The seller doesn't have any additional info either. Any help out there? TIA JohnF I'm gonna post to AMC also |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|