 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
using lathe as a mill?
"Ignoramus32621" wrote in message ... Are there any attachments for lathes that would allow me to use a lathe as a poor man's mill? Yes there are. They are called milling attachements. They are very limited in what they can do however. For an example look at http://www.campbelltools.com/palmgren.htm look for Lathe Milling Attachments. Lane |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| $850 for Clausing 8530 mill + Clausing 2' lathe? | Metalworking | |||
| FS: Bridgeport Mill and Myford ML7 lathe in UK | Metalworking | |||
| I am looking to buy a lathe and mill but don't have any more than $3500 to spend | Metalworking | |||
| (mis)adventures moving a Nichols mill | Metalworking | |||
| Boring, Lathe or Mill? | Metalworking | |||
Threaded Mode
